Amada SGLB M42 bi-metal high performance bandsaw blade for all industrial bandsaw machines.
The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
7 degree positive rake angle
Hardness of HRC 68-69
M-42 cobalt high speed steel edge
Specially designed tooth form
ADVANTAGES
Better tooth penetration
High heat resistance
High wear resistance
BENEFITS
Fast Cutting Rates
High production rate
Long life on moderate to difficult to cut materials
Low cost per cut
The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.
S: Standard Tooth, Straight Raker Set
PR: 7 Degree Positive Rake
MG:10 Degree Positive Rake
AG:Positive Rake, Large Gullet Size
WS:Wide Set
Specifications may change without notice at the sole discretion of Amada’s Engineering Department.
IRON LADY HSS circular saw blade reaches a new technical high, allowing you to work with high strength and stainless steels achieving higher cutting performance, even under poor lubrication conditions.
The metallurgists and engineers of our research ...
Amada SMARTCUT thin kerf saw blade is a bi-metal blade for metal cutting band saw machines, especially for thin cut applications.
When sawing narrow parts from expensive metal bars or blocks, using SMARTCUT BAND gives you twofold cost-saving benefits...
Amada AXCELA B High-performance carbide bandsaw blade for metal cutting band saws. One of many in a range of carbide band saw blades for all applications.
Universally usable for Heat treated steels, duplex, titanium and non ferrous materials Especial...
Standard blades are steam oxide coated | Use Addicut flood coolant to prevent pick up and over heating. | M2 or M35 Cobalt | Designed for slow RPM cutting - 40/80rpm | Suitable for ferrous & non ferrous materials | Available in all common sizes | Scr...